|
APRILIA RSV250 '95 |
Max Biaggi's machine on Japanese GP (Cast-iron brake discs are fitted in the wet.)
|
|
ENGINE TYPE |
two-stroke, water cooled
twin cylinder (90º V formation)
rotary disc valve (2 rotors on the right side)
twin crankshaft (turn in opposite directions)
|
|
BORE × STROKE |
54 × 54.5mm |
DISPLACEMENT |
249.6cm³ |
|
COMPRESSION RATIO |
17:1 |
|
EXHAUST DEVICE |
RAVE system
varying ex-port height by electronically controlled valve |
|
MAX. POWER |
over 92HP at 12,500rpm |
|
CARBURETTOR |
2 Dell'Orto flat valve carburettors (New Product) |
|
IGNITION |
CDI digital with battery |
|
GEARBOX |
extractable 6 speeds |
|
CLUTCH |
dry multiple discs |
|
FRAME |
twin spar alluminium |
|
SUSPENSIONS |
FRONT |
upside-down telescopic fork (Öhlins)
inner-tube diameter: ø42mm
adjustable spring pre-load, compression and rebound damping |
|
REAR |
swing-arm and mono-shock (Öhlins) with linkage
adjustable spring pre-load, compression and rebound damping
and electric damping control (APS)
|
|
BRAKES |
FRONT |
disc: carbon-composite (ø255 or 273mm)
caliper: Brembo 4 pistons |
|
REAR |
disc: ø184mm
caliper: Brembo 2 pistons |
|
WHEELS |
FRONT |
3.50-17 (Marchesini, magnesium alloy) |
|
REAR |
5.50-17 (Marchesini, magnesium alloy) |
|
DIMENSIONS |
weight: 95kg
wheel base: 1345mm
fuel tank capacity: 22 litres |